ENTHALIO

Fault Codes / Dixell / EAL

DI

Dixell EAL

Medium

XR160D / XR170D (i1F/i2F dijital giriş yapılandırması) — Generic (non-serious) external alarm via the configurable digital input (i1F/i2F = EAL) — on XR160D/XR170D the raw code is displayed literally as "EAL" (not abbreviated to "EA" as on XR60CX/XR06CX).

Dixell EAL: Generic (non-serious) external alarm via the configurable digital input (i1F/i2F = EAL) — on XR160D/XR170D the raw code is displayed literally as "EAL" (not abbreviated to "EA" as on XR60CX/XR06CX). This fault usually isn't an immediate stop, but should be checked soon.

Possible causes

Check steps

Affected parts

Safety note

Disconnect all electrical connections before working on the wiring.

Source: Dixell resmi servis kilavuzu (bagimsiz cift-dogrulandi) — Dixell XR160D-XR170D Installing and Operating Instructions, rel.1.0, cod.1592008430 (official manufacturer manual, Dixell s.r.l.). Section 11 "ALARM SIGNALS" table: Message "EAL" — Cause: "External alarm" — Outputs: "Alarm output ON; Other outputs unchanged". Section 6.2 "CONFIGURABLE INPUT - GENERIC ALARM (EA…

Reviewed by Anıl Güzeldemir — in the refrigeration machine room since 2006, developer of Enthalio.

Look up in Enthalio →

Related fault codes

Serious external alarm via the configurable diBAL Pressure switch alarm via the configurable digPAL Thermostat probe (Probe 1) fault or wrong probP1 Evaporator probe (Probe 2) fault — defrost conP2 Third probe (Probe 3) fault (e.g. condenser/prP3 High temperature alarm (too warm).HA