Fault Codes / Trane / LCI-C Software Mismatch

Trane LCI-C Software Mismatch

Medium

Tracer CH530 (CGAM/CXAM) — LCI-C Neuron software and LCI-C IPC3 software do not match.

Trane LCI-C Software Mismatch: LCI-C Neuron software and LCI-C IPC3 software do not match. This fault usually isn't an immediate stop, but should be checked soon.

Possible causes

LCI-C component software versions are inconsistent (e.g. after a partial replacement).

Check steps

Load new LCI-C Neuron software using the LonTalk service tool.

Affected parts

LCI-C Modul

Safety note

Nonlatching — remote resettable.

Source: Trane Tracer CH530 Control System for Scroll Chillers CGAM/CXAM 020-170 User Guide (CG-SVU06B-E4), Table 4 Main Processor Diagnostics, p.29-31

Reviewed by Anıl Güzeldemir — in the refrigeration machine room since 2006, developer of Enthalio.

Look up in Enthalio →

Related fault codes

Phase protection module recognized a phase losPhase Protection Fault The suction refrigerant pressure fell below thLow Pressure Cutout A circuit's suction pressure dropped belowVery Low Suction Pressure The discharge temperature exceeded the limits High Discharge Temperature 5 high discharge temperature diagnostics occurHigh Discharge Temperature Lockout The compressor fault switch input is open.Compressor Fault