Stiebel Eltron 10024

Critical

WPL / WPMsystem — Hot gas temperature exceeded the limit.

Stiebel Eltron 10024: Hot gas temperature exceeded the limit. This fault typically halts operation and needs immediate attention.

Possible causes

Injection/expansion valve not working correctly.
Refrigerant leak.

Check steps

Check injection/expansion valve operation.
Check for leak, correct charge.

Affected parts

Expansionsventil
Kältemittel

Safety note

Hot surfaces & refrigerant – qualified only.

Source: Stiebel Eltron resmi servis kılavuzu — PDF p.2 (line 39-42): '10024 Wärmepumpe Heißgas-Temperatur hat Grenzwert überschritten. Einspritzventil arbeitet nicht richtig. Expansionsventil arbeitet nicht richtig. Kältemittelleckage.' Exact matc

Reviewed by Anıl Güzeldemir — in the refrigeration machine room since 2006, developer of Enthalio.

Look up in Enthalio →

Related fault codes

High pressure limiter responded.10004 Low pressure switch triggered.10005 Compressor or starting contactor stuck.10002 Frost protection monitor triggered in defrost 10015 HP does not rise above LP after compressor sta10027 Compressor thermistor protection relay trigger30054