Samsung E462

Critical

DVM / Split — Total current / power-limit control (compressor stopped).

Samsung E462: Total current / power-limit control (compressor stopped). This fault typically halts operation and needs immediate attention.

Possible causes

Overcurrent / overload / supply issue.

Check steps

Check supply voltage & run current.
Check overload causes (pressure/condenser).

Affected parts

Inverter-PBA
Verdichter

Safety note

High voltage! Let capacitors discharge.

Source: Samsung resmi servis kılavuzu — Samsung Service Manual AC-00216E_1 ("SYSTEM AIR CONDITIONER" DVM S ECO HR, models AM036/048/053/060NXMDCR), §Troubleshooting → 2. Error Code table, p.36: "E-462 Compressor stop due to full current control or error due to low current". Also §3-27 (p.64) "Current error / PFC overlo…

Reviewed by Anıl Güzeldemir — in the refrigeration machine room since 2006, developer of Enthalio.

Look up in Enthalio →

Related fault codes

Indoor/outdoor communication error.E101 Room temperature sensor (Room-TH) fault.E121 Indoor fan error.E154 Discharge temperature too high (DIS-TH over).E416 Outdoor EEV (expansion valve) self-diagnosis eE422 Communication error indoor ↔ outdoor (trackingE102