Lennox F1

High

Mini-Split MWM/MPA (Außeneinheit) — Outdoor coil sensor (T3) error — voltage outside 0.06-4.94V range.

Lennox F1: Outdoor coil sensor (T3) error — voltage outside 0.06-4.94V range. This fault noticeably affects operation.

Possible causes

Sensor connection loose/faulty or sensor resistance out of spec.

Check steps

Check sensor connection, compare resistance with reference table.

Affected parts

T3-Fühler

Safety note

Isolate power before testing.

Source: Lennox Mini-Split Systems Service Manual — Indoor and Outdoor Unit Error Codes (Corp. 1816-L7, 2018), "Extended Reference Guide - Outdoor Unit Error Codes" §4 and "Indoor Unit Error Codes" §5

Reviewed by Anıl Güzeldemir — in the refrigeration machine room since 2006, developer of Enthalio.

Look up in Enthalio →

Related fault codes

Outdoor EEPROM malfunction — main control boarE0 Communication error between outdoor unit main E3 Indoor unit coil outlet temperature sensor (T2E4 Outdoor ambient sensor (T4) error — voltage ouF2 Compressor discharge sensor (T5) error — voltaF3 High or low voltage protection active.E5